Purpose: development of technology for repairing canal linings concrete with bitumen-polymer mastic using one- and two-component latex emulsion to reduce water loss through defects in the concrete lining.
Materials and methods: the technology of repairing the damaged canal lining concrete coating includes: preparation of the base for the protective coating; preparation of bitumen-polymer mastic for its application (manually) or spraying (mechanized) over the entire repaired area; preparation of equipment, mechanisms and necessary inventory; preparation for the use of material components (reagent (component A) and hardener (component B)) for mechanized application; the process of applying bitumen-polymer mastic to the repaired area.
Results: according to the results of a scientific research, when repairing the internal junctions of the bottom and slopes of canal concrete linings, it is necessary to arrange fillets that have a triangle with sides 10–50 mm long in their cross-section. The use of fillets when joining concrete linings will avoid excessive consumption of repair material. The application of a one-component material is carried out manually using a spatula to repair minor damage and reduce losses through them, and the application of a two-component mastic will allow mechanized repair of the largest (areal) damage.
Conclusions: the application of one- and two-component cold-curing bitumen-polymer mastic for repairing concrete lining of irrigation canals to various damages on their surface (cracks, shears, concrete scaling, destroyed seams, etc.) is considered. Technological operations for the repair and restoration of canal concrete linings (a technological map for the concrete surfaces repair with a mechanized polymer composite material has been developed), including five stages of work are presented.
doi: 10.31774/2712-9357-2021-11-3-299-313
repair technology, concrete lining, cracks, impervious measures, polymer compositions, water permeability
Garbuz A. Yu., Talalaeva V. F. Repair technology of canal concrete lining with bitumen-polymer mastic // Land Reclamation and Hydraulic Engineering [Electronic resource]. 2021. Vol. 11, no 3. P. 299–313. URL: http:www.rosniipm-sm.ru/en/article?n=1229 (date of access: 18.08.2021). doi: 10.31774/2712-9357-2021-11-3-299-313
1. Bandurin M.A., 2021. Ekspluatatsionnyy monitoring i ostatochnyy resurs vodoprovodyashchikh sooruzheniy meliorativnykh sistem [Operational monitoring and residual resource of water-conducting structures of reclamation systems]. 2nd ed., rev. and compl. Novocherkassk, Lik Publ., 233 p. (In Russian).
2. Kosichenko Yu.M., Ugrovatova E.G., Baev O.A., 2015. Obosnovanie raschetnykh zavisimostey fil'tratsionnykh soprotivleniy konstruktsiy oblitsovok kanalov [Justification of the calculated dependences of the filtration resistances of canal lining structures]. Izvestiya VNIIG im. B. Ye. Vedeneeva [Bull. of VNIG named after B.E. Vedeneev), vol. 278, pp. 35-46. (In Russian).
3. Kozlov D.V., Krutov D.A., 2018. Kompleksnye tekhnicheskie resheniya pri rekonstruktsii plotin [Complex technical solutions for dam reconstruction]. Prirodoobustroystvo [Environmental Engineering], no. 2, pp. 22-28. (In Russian).
4. Kosichenko Yu.M., Garbuz A.Yu., 2017. Raschetnaya otsenka vodopronitsaemosti treshchin betonnykh oblitsovok kanalov na osnove gidravlicheskikh metodov [Rated estimation of water permeability of cracks in concrete canal linings based on hydraulic methods]. Prirodoobustroystvo [Environmental Engineering], no. 5, pp. 34-42. (In Russian).
5. Baev O.A., 2013. [Anti-filtration lining using bentonite mats for liquid waste accumulators]. Nauchnyy Zhurnal Rossiyskogo NII Problem Melioratsii, no. 3(11), pp. 115-124, available: http:rosniipm-sm.ru/article?n=681 [accessed 15.04.2021]. (In Russian).
6. Solskiy S.V., Lopatina M.G., Bykovskaya S.A., Klushentsev V.A., 2020. Problemy primeneniya geosinteticheskikh materialov (geomembran) v konstruktsii protivofil'tratsionnykh elementov gidrotekhnicheskikh sooruzheniy [Issues of geosynthetic materials (geomembranes) application in the design of hydraulic structures impervious elements]. Izvestiya VNIIG im. B. Ye. Vedeneeva [Bull. of VNIG named after B.E. Vedeneev], vol. 296, pp. 22-43. (In Russian).
7. Eremeev A.V., Khanov N.M., 2018. Podbor optimal'noy proportsii bitum-polimernogo vyazhushchego i shchebnya v tele geomata, primenyayemogo dlya zashchity otkosov v gidrotekhnicheskom stroitel'stve [Selection of the optimal proportion of bitumen-polymer binder and crushed stone in the body of a geomat used to protect slopes in hydraulic engineering construction]. Doklady TSKHA: sb. st. [Proc. of Timiryazev Agricultural Academy: Collection of Articles]. Moscow, RGAU-MSKhA Publ., vol. 290, pt. 1, pp. 169-171. (In Russian).
8. Wang X.D. [et al.], 2016. Progress in the cause and repair technology of channel seepage. Chinese Journal of Geotechnical Engineering, vol. 38, pp. 21-24, DOI: 10.11779/CJGE2016S1004.
9. Baev A.A., 2014. Primenenie planirovaniya eksperimenta dlya izucheniya vodopronitsaemosti ekrana iz geomembrany [Applying of planning the experiment for studying water permeability of geomembrane diaphragm]. Prirodoobustroystvo [Environmental Engineering], no. 3, pp. 46-51. (In Russian).
10. Savino V., Lanzoni L., Tarantino A.M., Viviani M., 2020. A cohesive model to predict the loading bond capacity of concrete structures repaired / reinforced with HPFRC / UHPFRC and stressed to mixed mode. Cement and Concrete Composites, vol. 112, no. 103673, DOI: 10.1016/j.cemconcomp.2020.103673.
11. Ishchenko A.V., Baev O.A., 2013. [Analysis of the existing test methods for the physical and mechanical properties of bentonite mats]. Nauchnyy Zhurnal Rossiyskogo NII Problem Melioratsii, no. 2(10), pp. 175-185, available: http:www.rosniipm-sm.ru/article?n=648 [accessed 14.02.2021]. (In Russian).
12. Garbuz A.Yu., 2014. Obespechenie vodonepronitsaemosti oblitsovok orositel'nykh kanalov za schet primeneniya zhidkikh polimerov [Ensuring the waterproofing of the lining of irrigation canals through the use of liquid polymers]. Puti povysheniya effektivnosty oroshaemogo zemledeliya [Ways of Increasing the Efficiency of Irrigated Agriculture]. Novocherkassk, RosNIIPM, iss. 56, pt. 1, pp. 21-29. (In Russian).
13. Oborudovanie dlya naneseniya zhidkoy reziny [Equipment for Applying Liquid Rubber], available: https:poliuretan.ru/zhidkaya-rezina/oborudovanie-dlya-zhidkoy-reziny/ [accessed 15.04.2021]. (In Russian).
