Purpose: to develop an algorithm for arranging a pumping unit for irrigation purposes taking into account the energy-saving operating mode of a diesel internal combustion engine and with the ability to adjust head and rate specifications in a wide, acceptable range.
Materials and methods. The studies were conducted using a simulated scheme that includes a mobile pumping unit that withdraw irrigation water from a canal and transfers it via a pipeline to two center pivot sprinklers operating alternately. Generally accepted formulas to calculate power, torque, and flow were used. The proportionality law, selection method, and graphoanalytical method were applied.
Results. The proposed algorithm has the following stages: source data capture – preliminary selection of a pump and an internal combustion engine – establishment of the pump speed control range – calculation of head, flow rate, power and torque on the pump shaft – digitization of the main characteristics of the internal combustion engine in a given crankshaft speed limit – comparison of pump and engine torques – comparison of pump and internal combustion engine capacities – analysis of graphic data on the torque and power of the pump and internal combustion engine – calculation of the energy characteristic of the water flow (Q·H) and construction of its dependence on RPM – clarification of the number of revolutions of the engine crankshaft to ensure the specified head-flow characteristics of the pump. In this case, the selection of the internal combustion engine was made taking into account its operation within the crankshaft speed limits providing the minimum specific fuel consumption.
Conclusions. The developed algorithm allows selecting elements of a reclamation pumping unit taking into account the energy-saving operating mode of the internal combustion engine, as well as specifying the required pump shaft speed for the required performance.
doi: 10.31774/2712-9357-2024-14-4-371-389
algorithm, pump, internal combustion engine, pumping unit, control limit, energy-saving mode
Voevodin O. V., Kozhanov A. L. Algorithm for selecting a pump and a diesel internal combustion engine when assembling a pumping unit for reclamation purposes. Land Reclamation and Hydraulic Engineering. 2024;14(4):371–389. (In Russ.). https://doi.org/10.31774/2712-9357-2024-14-4-371-389.
1. Prochiy D.V., Volkova E.A., Korzhov V.I., 2023. Ispol'zovanie elementov modelirovaniya raboty meliorativnykh nasosnykh stantsiy pri perekhodnykh gidravlicheskikh rezhimakh [Use of operation simulation elements of the reclamation pumping stations under transient hydraulic modes]. Melioratsiya kak drayver modernizatsii APK v usloviyakh izmeneniya klimata: materialy IV Mezhdunar. nauch.-prakt. internet-konf. [Land Reclamation as a Driver for the Agro-Industrial Complex Modernization in the Context of Climate Change: Proc. of the IV International Scientific-Practical Internet Conference]. Novocherkassk, Lik Publ., pp. 59-64, EDN: QQENNM. (In Russian).
2. Soloviev D.A., Zhuravleva L.A., 2019. Resursosberezhenie pri proektirovanii i ekspluatatsii dozhdeval'nykh mashin krugovogo deystviya [Resource saving in the design and operation of centre pivot sprinklers]. Agrarnyy nauchnyy zhurnal [Agrarian Scientific Journal], no. 8, pp. 81-88, DOI: 10.28983/asj.y2019i8pp81-88, EDN: EEWTCR. (In Russian).
3. Soloviev D.A., Zhuravleva L.A., Soloviev V.A., Kuznetsov R.N., 2019. Sovershenstvovanie tekhnologii poliva dozhdeval'nymi mashinami krugovogo deystviya «Kaskad» [The improvement of technological methods of irrigation by center pivot sprinkling machines “Cascadeˮ]. Nauchnaya zhizn’ [Scientific Life], no. 1, pp. 57-65, EDN: HDDVJO. (In Russian).
4. Kupriyanov A.A., 2019. Sovershenstvovanie konstruktsii dozhdeval'noy mashiny krugovogo deystviya [Improving the design of the center pivot sprinkler]. Nauka i molodezh': sb. nauch. trudov [Science and Youth: Collection of Scientific Papers]. Novocherkassk, Novocherkassk Engineering and Land Reclamation Institute named after A. K. Kortunov Donskoy GAU, vol. 6, pp. 13-19, EDN: TMNOFC. (In Russian).
5. Olgarenko G.V., Bulgakov V.I., Kapustina T.A., Zamakhovsky M.P., 2019. Vybor optimal'nogo varianta poliva dozhdeval'noy mashinoy frontal'nogo ili krugovogo deystviya i raschet parametrov orosheniya («VOVDM.xlsx») [Selection of the Optimal Irrigation Option Using a Frontal or Pivot Sprinkler and Calculation of Irrigation Parameters (“VOVDM.xlsx”)]. Certificate of State Registration of Computer Program, no. 2019614494, EDN: UFILHE. (In Russian).
6. Kozhanov A.L., Voevodin O.V., 2021. [Drainage and humidification systems in flat land using frontal and frontal-pivot sprinklers]. Melioratsiya i gidrotekhnika, vol. 11, no. 3, pp. 95-108, available: https:rosniipm-sm.ru/article?n=1216 [accessed 18.09.2024], DOI: 10.31774/2712-9357-2021-11-3-95-108, EDN: GZRQZT. (In Russian).
7. Babichev A.N., Monastyrsky V.A., Olgarenko V.I., Skidanov R.V., Podlipnov V.V., 2019. Sistema upravleniya shirokozakhvatnoy dozhdeval'noy mashiny krugovogo deystviya dlya pretsizionnogo orosheniya [Control system of a wide-cut pivot sprinkler for precision irrigation]. Puti povysheniya effektivnosti oroshaemogo zemledeliya [Ways of Increasing the Efficiency of Irrigated Agriculture], no. 1(73), pp. 195-199, EDN: DWEWYJ. (In Russian).
8. Toirov O.Z., Khalikov S.S., 2024. Research and evaluation of the reliability indicators of pumping units for mechanical irrigation of the pumping station «Kyzyl-Tepa». Power Technology and Engineering, vol. 57, no. 5, pp. 690-696, DOI: 10.1007/s10749-024-01720-2, EDN: BJPRJB.
9. Bakhriddin K., Azam A., Alisher D., 2019. Full-scale testing of water intake pumps of pumping stations. E3S Web of Conferences: 22nd International Scientific Conference on Construction the Formation of Living Environment, FORM 2019. Tashkent, EDP Sciences, vol. 97, 05017, DOI: 10.1051/e3sconf/20199705017, EDN: BGGLTU.
10. Kivlyak P.Ya., Polubyatko V.G., 2013. Raschet moshchnosti nasosa dlya perekachki zhidkosti po truboprovodu [Calculation of pump capacity for liquid pumping through a pipeline]. Materialy konferentsii studentov i molodykh uchenykh, posvyashchennoy pamyati professora M. V. Korableva [Proceedings of the Conference of Students and Young Scientists Dedicated to the Memory of Professor M. V. Korablyov]. Grodno, Grodno State Medical University, pp. 352-353, EDN: GVGXUU. (In Russian).
11. Makushev Yu.P., Abishev K.K., Asylova K.B., 2019. Opredelenie tekhniko-ekonomicheskikh pokazateley dvigatelya vnutrennego sgoraniya putem analiza yego kharakteristik [Determination of technical and economic indicators of an internal combustion engine by analyzing its characteristics]. Nauka i tekhnika Kazakhstana [Science and Technology in Kazakhstan], no. 4, pp. 95-108, EDN: ZGSYQU. (In Russian).
12. Batrshin A.Sh., Birzul A.N., Pitilyak D.A., 2017. Eksperimental'naya proverka formuly perescheta podachi nasosa pri chastotnom regulirovanii aerozol'nogo kompleksa «Tuman» [Experimental verification of the formula for recalculating the pump flow rate with frequency regulation of the aerosol complex “Tuman”]. Sovremennye issledovaniya v oblasti tekhnicheskikh i yestestvennykh nauk: sb. nauch. tr. po materialam mezhdunar. nauchno-prakt. konferentsii [Modern Research in the Field of Technical and Natural Sciences: Coll. Sci. Papers Based on the Proc. of the International Scientific-Practical Conference]. Belgorod, Agency for Prospective Scientific Research Publ., pp. 173-178, EDN: YRIUUP. (In Russian).
13. Kritskaya V.I., Ivashechkin V.V., 2022. Grafoanaliticheskiy metod rascheta skvazhinnogo vodozabora [Graph-analytical method for calculating well water intake]. Innovatsionnye tekhnologii v vodnom, kommunal'nom khozyaystve i vodnom transporte: materialy II Resp. nauchno-tekhn. konferentsii [Innovative Technologies in Water, Utilities and Water Transport: Proc. of the II Republican Scientific-Technical Conference]. Minsk, BNTU, pp. 244-248, EDN: ZNESXW. (In Russian).
14. Donskoy Yu.A., 2007. Odin iz kriteriev opredeleniya verkhnego predela chastoty vrashcheniya rotora ETSN [One of the criteria for determining the upper limit of the rotor speed of the ESP]. Territoriya neftegaz [Oil and Gas Territory], no. 8, pp. 68-71, EDN: LHODEF. (In Russian).
15. Kozlov I.V., Peshcherenko S.N., 2019. Kriterii podobiya lopastnykh nasosov [Similarity criteria for vane pumps]. Vestnik Permskogo universiteta. Fizika [Bulletin of Perm University. Physics], no. 3, pp. 5-11, DOI: 10.17072/1994-3598-2019-3-05-11, EDN: CBGVJZ. (In Russian).
16. Akhmedova N.R., Naumov V.A., 2022. Kriterii podobiya avtonomnoy perekachivayushchey sistemy i ikh vliyanie na pokazateli energeticheskoy effektivnosti [Similarity criteria of an autonomous pumping system and their impact on energy efficiency indicators]. Stroitel'stvo: nauka i obrazovanie [Civil Engineering: Science and Education], vol. 12, no. 1, pp. 74-87, DOI: 10.22227/2305-5502.2022.1.6, EDN: DLFWSI. (In Russian).
